Reliable Supplier Hot Rolled Pipe - DC01 Cold rolled steel sheet coil DIN EN 10130 10209 DIN 1623 – Ruiyi

Short Description:

Product Detail

Product Tags

Feedback (2)

To become the stage of realizing dreams of our employees! To build a happier, more united and extra professional workforce! To reach a mutual advantage of our prospects, suppliers, the society and ourselves for Black Aluminium Checker Plate, Stair Safety Strip, Vinyl Siding Aluminum Trim, While using the improvement of society and economy, our corporation will retain a tenet of "Focus on trust, high quality the first", moreover, we count on to make a glorious long run with each and every customer.

Reliable Supplier Hot Rolled Pipe - DC01 Cold rolled steel sheet coil DIN EN 10130 10209 DIN 1623 – Ruiyi Detail:

Cold rolled steel according DIN EN 10130, 10209 and DIN 1623
One of the leading Mild Steel Strip suppliers in the China, supplying DC01 to DIN EN 10139, Cold rolled uncoated Mild Steel Strip for cold forming, BS 1449 CS1, DC03 to DIN EN 10139, Cold rolled uncoated Mild Steel Strip for cold forming, BS 1449 CS1/CS3 and DC06 to DIN EN 10139, Cold rolled uncoated Mild Steel Strip for cold forming, BS 1449 CS4

Technical data

Cold rolled steel according DIN EN 10130, 10209 and DIN 1623

Quality	Testing direction	Material-No.	Yield point Rp0,2 (MPa)	Tensile strength Rm (MPA)	Elongation A80 (in %) min.	r-Value 90° min.	n-Value 90° min.	Old Description
DC01	Q	1.0330	≤280	270 – 410	28			St 12-03
DC03	Q	1.0347	≤240	270 – 370	34	1,30		St 13-03
DC04	Q	1.0338	≤210	270 – 350	38	1,60	0,18	St 14-03
DC05	Q	1.0312	≤180	270 – 330	40	1,90	0,20	St 15-03
DC06	Q	1.0873	≤170	270 – 330	41	2,10	0,22
DC07	Q	1.0898	≤150	250 – 310	44	2,50	0,23

Quality	Testing direction	Material-No.	Yield point Rp0,2 (MPa)	Tensile strength Rm (MPA)	Elongation A80 (in %) min.	r-Value 90° min.	n-Value 90° min.
DC01EK	Q	1.0390	≤270	270 – 390	30
DC04EK	Q	1.0392	≤220	270 – 350	36
DC05EK	Q	1.0386	≤220	270 – 350	36	1,50
DC06EK	Q	1.0869	≤190	270 – 350	38	1,60
DC03ED	Q	1.0399	≤240	270 – 370	34
DC04ED	Q	1.0394	≤210	270 – 350	38
DC06ED	Q	1.0872	≤190	270 – 350	38	1,60

Quality	Testing direction	Material-No.	Yield point Rp0,2 (MPa)	Tensile strengthRm (MPA)	Elongation A80 (in %) min.	DIN 1623 T2 (old)
S215G	Q	1.0116G	≥215	360 – 510	20	St 37-3G
S245G	Q	1.0144G	≥245	430 – 580	18	St 44-3G
S325G	Q	1.0570G	≥325	510 – 680	16	St 52-3G

Cold rolled steel is also part of our product portfolio. Cold rolled steel is excellent for cold forming. This product group assigned the grades DC01 to DC07, DC01EK to DC06EK, DC03ED to DC06ED and S215G to S325G.

The grades are classified according to the maximum permissible yield strength and can be subdivided as follows.
DC01 – This grade can be used for simple forming work, for example Bending, embossing, beading and pulling are used.
DC03 – This grade is suitable for forming requirements such as Deep drawing and difficult profiles suitable.
DC04 – This quality is suitable for high deformation requirements.
DC05 – This thermoforming grade is suitable for higher forming requirements.
DC06 – This special deep drawing quality is suitable for the highest deformation requirements.
DC07 – This super deep drawing quality is suitable for extreme deformation requirements.

Enamelled grades
The steel grades DC01EK, DC04EK and DC06EK are suitable for conventional single-layer or double-layer enamelling.

The steel grades DC06ED, DE04ED and DC06ED are suitable for direct enamelling as well as for enamelling according to the two-layer / one-firing method and for special applications of two-layer enamelling for low-distortion enamelling.

Surface type

Surface A
Mistakes such as pores, small grooves, small warts, slight scratches and a slight discoloration that does not affect the ability to reshape and adhere to surface coatings are permitted.

Surface B
The better side must be free from defects so that the homogeneous appearance of a quality finish or an electrolytically applied coating is not impaired. The other side must at least meet the requirements of surface type A.

Surface finish
The surface finish may be particularly smooth, dull or rough. If no details are given when ordering, the surface finish will be delivered in a matt finish. The four surface finishes listed correspond to the center roughness values in the following table and must be tested in accordance with EN 10049.

Surface finish	characteristic	Average surface finish (boundary value: 0,8mm)
Special flat	b	Ra ≤ 0,4 µm
flat	g	Ra ≤ 0,9 µm
Matt	m	0,60 µm ˂ Ra ≤ 1,9 µm
rough	r	Ra ≤ 1,6 µm

Product detail pictures:

Related Product Guide:

Our organization sticks to your principle of "Quality may be the life of your organization, and reputation will be the soul of it" for Reliable Supplier Hot Rolled Pipe - DC01 Cold rolled steel sheet coil DIN EN 10130 10209 DIN 1623 – Ruiyi, The product will supply to all over the world, such as: Netherlands, Malawi, United States, Nowadays our merchandise sell all over the domestic and abroad thanks for the regular and new customers support. We supply high quality product and competitive price, welcome the regular and new customers cooperate with us!

1040 Cold Rolled Steel