-
CRC Manufacture Black Annealed Cold Rolled Steel Coil With SPCC DX51D Q195 Q235
Mill & Slit edge JIS G3141, SPCC, SPCD, SPCE, EN10130, GB Cold Rolled Steel Strip / Strips
As per JIS G 3141 SPCC/SPCD/SPCE/SPCC-1B, EN10130 DC01/DC02/DC03/DC04, DIN1623 ST12/ST13/ST14,
GB/T 700 Q195/Q235/Q345, SAE 1006, SAE 1008 etc
Anneal surface shape: brightness and black surface finish, Mill edge & Slit edge.
Coil Weight max. 7 MT, Coil ID 508mm
Thickness: 0.3~3.0MM
Width: 35~720MM
Minimum order: 50MT per size
-
Cold rolled low carbon DC01 DC03 DC04 DC05 DC06 steel sheet plate strip coil,
Cold rolled low carbon DC01 DC03 DC04 DC05 DC06 steel sheet plate strip coil
Cold rolled steel coil is the abbreviation of cold-rolled plain carbon structural plate, also known as cold-rolled sheet, commonly known as the cold plate. Cold plate is made of ordinary carbon structural steel hot rolled steel strip, after further cold rolling steel plate thickness is less than 4mm. Due to the rolling at room temperature, do not produce iron oxide, so cold plate surface quality, high dimensional accuracy, coupled with the annealing, mechanical and technological properties are superior to hot-rolled steel sheet, in many areas, especially household electrical appliance manufacturing, has been gradually replaced with its hot-rolled steel sheet
-
DC01 Steel Coil prime Cold rolled Steel Sheet Strips Steel Plate
Cold Rolled Steel Strip SPCC DC01 DC04 Cold Rolled Steel Coil 0.3-3.0mm
Name DC01 Steel Coil prime Cold rolled Steel Sheet Strips Steel Plate Standard JISG3141 2005 / EN 10130 1998 / GB/T 708 Grade Q195,Q215,Q235,SGCC,CGCC,SPCC,SPCD,SPCE,DX51D,DX52D,SPHC,DC01,DC03,DC04,ST12.. Width 600~1250mm Thickness 0.125~3.0mm Surface treatment chromated / galvanized/oiled/annealed ID coil 508mm or 610mm Coil weight 3-8 MT Package: Standard exporting package Application Industrial panels, roofing and siding for painting
Price terms FOB,CFR,CIF
Payment terms 30%T/T in advance+70% T/T
-
EN 10130 DC01 Steel 1.0330 cold rolled steel flat sheet
DC01 steel (1.0330 material) is a European standard cold-rolled quality low-carbon steel flat product for cold forming. In BS and DIN EN 10130 standard, it contains 5 other steel grades: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 ( 1.0873) and DC07 (1.0898), the surface quality is divided into 2 types: DC01-A and DC01-B. In addition, this steel is also used under electrogalvanizing conditions. The designation of the steel is DC01+ZE (or 1.0330+ZE), and the standard is EN 10152.
DC01 Meaning and Definition
- D: (Drawing) flat products for cold forming
- C: Cold rolled
- DC01: Drawing quality
- DC03: Deep drawing quality;
- DC04, DC05: Special deepdrawing quality;
- DC06: Extra deepdrawing quality;
- DC07: Super deep drawing quality.
-
ASTM EN10310 JISI Standard carbon steel strip Cold rolled Steel strip coil CRC
ASTM EN10310 JISI Standard carbon steel strip Cold rolled Steel strip coil CRC
Cold rolled steel sheet are mainly used in automobile, printed metal pail, building, building materials, and bicycle, etc. Additionally, it is the best material to manufacture organic coated strip.
Standard:JIS, ASTM, EN10130
Grade: SPCC, SPCD, ST12, ST13, ST14/16, DC01, DC02, DC03, DC04, DC05, DC06, Q195, Q195L,SAE1008,SAE1006
Szie: Thickness: 0.2-2.0mm
Width:15-1500mm.
(1) when the strip steel is rolled in a cold state, because of the work hardening of the strip steel, it must be softened again by intermediate annealing, and its plasticity should be restored in order to continue rolling;
(2) Before rolling, the surface scale of strip steel must be removed, thus ensuring the surface smoothness of strip steel and reducing the wear of rolls;
(3) Tension rolling is adopted, which ensures the good shape of strip steel, controls the thickness deviation of strip steel, reduces the rolling pressure, and is beneficial to rolling thin gauge products.
(4) Process cooling and lubrication are adopted, which is convenient to control the temperature of the roll and strip steel, reduce the friction between the roll and strip steel and reduce the rolling pressure, which is beneficial to the shape control and prevents the strip steel from sticking to the roll.
Cold rolled steel strip is widely used in cutting-edge technical fields, such as automobile, instrumentation, radio, national defense and aerospace industry, etc.
-
ASTM A1008 DIN16723 EN10130 cold rolled steel plate sheet for Oil drum
Cold rolled coil is produced by pickling hot-rolled coil and rolling it uniformly at an appropriated temperature to a thinner thickness. It has excellent surface configuration and superb mechanical properties for use in automobile and electronic appliance production.
Standard Specification JIS G 3141:2005 SPCCT-SD SPCD-SD, SPCE-SD, SPCF-SD,SPCG-SD ASTM A1008 CS TYPE A /B/ C DS TYPE A /B, DDS EDDS EN10130:2005 DC01 DC03 DC04 DC05 DC06 EN10268:2006 HC420LA HC380LA HC340LA HC300LA HC260LA SAE J403 SAE1006 SAE1008 SAE1010 JIS C2553 DC01EK DC03EK DC05EK Chemical Components:
Grade Chemical Components C Mn P S Alt St12 ≤0.10 ≤0.50 ≤0.035 ≤0.025 ≥0.020 St13 ≤0.08 ≤0.45 ≤0.030 ≤0.025 ≥0.020 St14 ≤0.08 ≤0.40 ≤0.025 ≤0.020 ≥0.020 Mechanical Properties:
1. Yield Strength: ≤320MPa
2. Tensile Strength: ≤370MPa
3. Elongation (L=50mm, b=25mm) When:
(1) Nominal Thickness <0.25mm: 30%
(2) Nominal Thickness 0.25mm-<0.40: 32%
(3) Nominal Thickness 0.40-<0.60mm: 34%
(4) Nominal Thickness 0.60-<1.0mm: 36%
(5) Nominal Thickness 1.0-<1.6mm: 37%
(6) Nominal Thickness >1.6mm: 38%
Application:
1. Base metal for coated and dipped products.
2. Home appliance and home furniture
3. Bicycle
4. Building industry
5. Battery Shell
6. Automobile fitting, hardware
7. Industrial products including motors, generators
Size Range: 0.30~3.0mm x 800–2000mm x Coil/Sheet
Coil ID: 508mm/610mm
Coil weight: 5—25MT
Bundle weight: max 2.5mt or max 5mt
Available Chinese Mill: WISCO,Capital Steel(Shougang), Ansteel, Maanshan, Baotou, Lianyuan, Tangshan, Jinan, Panzhihua, Kunming, etc and private mills
-
DC01 Cold rolled steel sheet coil DIN EN 10130 10209 DIN 1623
COLD ROLLED STEEL SHEET AND COIL – (DC01 BS EN 10130:2006)Cold rolled steel, (often referred to as Cold reduced or CR), is a low carbon product, produced using raw material such as coke and coal at steel mills through out the world.
DC01 steel (1.0330 material) is a European standard cold-rolled quality low-carbon steel flat product for cold forming. … In addition, this steel is also used under electrogalvanizing conditions. The designation of the steel is DC01+ZE (or 1.0330+ZE), and the standard is EN 10152
-
Prime CRC Households appliance cold rolled steel coil sheet SAE1008 SPCC
Households appliance cold rolled steel coil sheet SAE1008 SPCC
1 Thickness: 0.15-3.0mm2 Width: 750-1010/1220/1250mm
3 Length as per customer’s request.
4 Steel Grade:SPCC, SPCD, SPCE, DC01, DC02, DC03, DC04, SAE 1006, SAE 1008 etc.
Soft commercial quality, Full hard quality or Deep Drawing quality.
5 Packing: standard export packing.
-
Commercial use DC01, DC02, DC04 Full Hard Quality Cold Rolled Steel Sheet
DC01,DC02,SAE1006 Cold Rolled Steel Sheet With Soft Commercial, Full Hard Quality
1 Thickness: 0.15-3.0mm2 Width: 750-1010/1220/1250mm
3 Length as per customer’s request.
4 Steel Grade:SPCC, SPCD, SPCE, DC01, DC02, DC03, DC04, SAE 1006, SAE 1008 etc.
Soft commercial quality, Full hard quality or Deep Drawing quality.
5 Packing: standard export packing.
-
cold rolled steel coil DC01 DC03 DC04 DC06
DC03 – This grade is suitable for forming requirements such as Deep drawing and difficult profiles suitable. DC04 – This quality is suitable for high deformation requirements. … DC06 – This special deep drawing quality is suitable for the highest deformation requirements.
